fuel pumps, street fuel pumps, racing fuel pumps, bottom feed fuel pumps plate kits, fuel pressure regulator kits, braided fuel line, electric fuel pumps
| turbochargers, turbo, diesel injection , fuel injection, common rail, fuel pumps, nozzles, solenoids, actuators, valve actuators, rebuilt turbochargers, hoses, bosch appliances, bosch tools, delphi components, diesel fuel injection, denso, carter fuel pumps , delphi, fuel injection pumps, garrett turbo, garrett turbochargers, honeywell international, superchargers, turbo kit, turbochargers work, fuel additives , turbochargers parts, glow plugs, fuel filters, rubber hoses, fuel injectors, superchargers, bosch, delphi, garrett, mitsubishi, toyota, ihi, kkk, denso, honeywell, iveco, turbines, index, | |
|
fuel pumps - Street fuel pumps - Racing fuel pumps - Bottom Feed fuel pumps Plate Kits - Fuel Pressure Regulator Kits
- Braided Fuel Line - Electric fuel pumps - In Tank fuel pumps Designed for use with all carburetors, these high-performance Street fuel pumps have six valves and a flow capacity of 110 gallons per hour. The unique valve design improves flow quantity and quality, and will support engines up to 550 hp. High-volume, 3/8" NPT inlet and outlet surpasses the capacity of conventional models. Produces 6 psi which is correct fuel pressure for street. For gasoline or mixed fuels only. NOTE: Use ’s fuel pumps Kit 97 for tight engine compartments. Victor Series Racing fuel pumps Flow capacity for ’s 6-Valve Racing fuel pumps is 130 gallons per hour as compared to conventional racing pumps at 114 gallons per hour. A must for drag racing, circle track racing, street machines or any application that demands a high-volume fuel delivery. High-volume 1/2" NPT inlet and outlet orifices surpass the capacity of conventional models. Also, the finest quality materials are used along with 6-valve pump body and large alcohol-proof diaphragm. Beautifully detailed with aircraft-type allen bolts. Produces 13 to 14 psi. For gasoline and alcohol. Use with our Fuel Pressure Regulator #8190 or 27. Bottom Feed fuel pumps Plate Kits These kits allow you to use Street and Racing fuel pumps (and other manufacturers’ 6-valve pumps) on 1970-1/2 to 1981 Camaros or other vehicles where there is a space problem. AN fittings can be used and the fuel lines can be routed more neatly through the engine compartment. Kits include a machined aluminum plate along with all necessary gaskets and plugs. They replace the lower section of the fuel pumps and allow bottom feed fuel line fittings rather than the opposing side feed fittings on most aftermarket pumps. The fuel pumps Kits do not change the flow or pressure ratings of the pump. fuel pumps Kit for Street fuel pumps fuel pumps Kit for Racing fuel pumps Fuel Pressure Regulator Kits For Holley Standard-Flange Dual-Feed or 4500 Series Carbs Adjust fuel pressure from 4-1/2 to 9 psi. Match with racing fuel pumps. Kits include fittings, mounting plate, fuel line and single or dual regulators. Fuel line from fuel pumps to regulator is not included; use #8122 or #8127 (see below). Single Regulator, Dual Outlet, Single Regulator, Dual Outlet, Single Regulator, Dual Outlet, Single Regulator Plate Only, Fuel Pressure Regulator Stainless Steel Braided Fuel Line Kits For Racing fuel pumps to Regulator Kits Connects mechanical racing fuel pumps to the Fuel Pressure Regulator Kits. Made of the highest quality materials. One-piece pre-assembled kits. Fits 1/2" NPT outlets and 3/8" NPT inlet fuel line. Braided Fuel Line Kit (for small-block applications) Braided Fuel Line Kit (for big-block applications) Electric fuel pumps Manufactured by Essex Industries, one of the most renowned fuel system manufacturers, these state-of-the-art Electric fuel pumps offer maximum performance in a compact package. With anodized aluminum housings and high-quality internals, they are both strong and durable. Each pump is factory-tested and includes mounting brackets. 90 features a –10 AN inlet/outlet and a flow rate of 80 GPH at 45 psi for use with high-hp fuel injected applications. The in-line design keeps the pump motor and components cool even under harsh conditions. 91 is factory preset to 6.5 psi and no regulator is required. With a replaceable screen type inlet filter and the flow rate of 120 GPH is sufficient to supply 600 hp. 92 has a flow rate of 160 GPH, enough to feed a 1000 hp engine. This pump is factory preset to 12 psi and requires an external regulator such as the new regulator 27. Fuel Pressure Regulators These new Fuel Pressure Regulators are machined from aircraft quality aluminum for those who demand the best. Manufactured by Essex Industries, these regulators have fluorosilicone diaphragm material for extended life and high temperature protection. They are compatible with all grades of gasoline/methanol and have 1/8" NPT gauge ports. Mounting bracket, fittings and hardware are included. 27 has 1/2" NPT inlet/outlets and is adjustable from 5 to 10 psi providing extremely consistent pressure regulation for carbureted applications. 28 is adjustable from 35 to 90 psi and has two –6 AN inlet ports plus a single –6 AN outlet. 29 offers the same flow performance but with a longer body and –10 AN inlet ports. Both are capable of handling the flow from twopumps for systems well beyond 1000 hp. These OE in-tank upgrade pumps are ideal for supporting performance improvements such as a high performance intake manifold, cams, turbo, direct port nitrous systems, big-bore throttle body, etc. They replace your original pump exactly and include all necessary hardware for an easy installation |
|